P
patricia84Aug 1, 2025
What to do if my Roksan Audio Amplifier has no output on one or more channels?
- AAngel CherryAug 2, 2025
If you are experiencing no output on one or more channels of your Roksan Audio Amplifier, consider the following potential causes: * A missing or bad input signal connection. Check all input connections to ensure they are properly connected. * An incorrect speaker connection. Verify the speaker output connections on the rear panel. * A higher trim on one or both channels. Inspect the trim level and adjust it as needed. * Loudspeakers connected out of phase. Make sure to check the polarity of the speaker connections, which is especially important if you are using multi-wiring or multi-amping.










