L
Lisa TerrellJul 31, 2025
What to do if my Roksan Audio M 1 Amplifier has no output on one or both channels?
- DDouglas WhiteJul 31, 2025
If your Roksan Audio Amplifier has no output on one or both channels, here's what you can check: * Ensure the amplifier is not in stand-by mode (MODE light should be RED, not GREEN). Press the MODE button to switch to operational mode. * Verify all input connections are correctly connected. * Check the speaker output connections on the rear panel. * Make sure the correct input is selected and the source is working. * Deselect Tape Monitor if it's selected. * Allow the amplifier to cool down, increase ventilation, or lower the volume if it's overheating. * Deselect MUTE (check the volume setting first). * Check the polarity of speaker connections, especially if multi-wiring or multi-amping.