What to do if my Roksan Audio Amplifier has no output on one or both channels?
- RRonald HarrisAug 1, 2025
If your Roksan Audio Amplifier isn't producing sound on one or both channels, here's what you should check: * Ensure the amplifier isn't in stand-by mode. If the MANUAL indicator light is RED, press the MANUAL Button to switch to operational mode (MANUAL Light should be GREEN). * Verify all input connections to make sure they are properly connected. * Check the speaker output connections on the rear panel to ensure they are correctly connected. * If the unit has overheated, allow it to cool down. Increase ventilation around the amplifier or use it at a lower volume. * Confirm the polarity of the speaker connections, particularly if you're using multi-wiring or multi-amping setups, to ensure they are in phase.















