26
Selecting and Playing Sounds
Adjust the Volume Balance
The AT-15 allows you to adjust the volume balance individually for each
Part.
fig.02-13
The following buttons are used to adjust the volume of a multiple number
of Parts.
Accomp/SMF [
▼
] [
▲
] button:
• Automatic Accompaniment (except bass part)
• Playback of performance data from something other than the Atelier
(EX.: SMF music files)
Rhythm [
▼
] [
▲
] button:
• Rhythm performance
• Drums/SFX
Pedal Level [
▼
] [
▲
] button:
• Pedal Voice
• Bass part of Automatic Accompaniment
1.
The volume levels of each part are adjusted using the
corresponding [
▲
] and [
▼
] buttons.
When you press the up button (
▲
), the volume increases; when you press
the down button (
▼
), the volume decreases.
The volume can be set to any value from 0 to 12.
When you press the Level [
▲
] [
▼
] buttons, the volume for each part will be
shown in the display.
fig.02-14
NOTE
When the volume value
shown in the display is 0,
that part will produce no
sound.
AT-15_e.book 26 ページ ２００５年１月２１日 金曜日 午後８時１４分
To Next Page
Loading...
