69
Record and Playback Your Performance
Erasing a Performance Song
If you wish to discard your recording and re-record from the beginning, or
if you wish to record a new performance, you must erase the previously-
recorded data.
fig.08-09
1.
Press the [Registration] and [Save] buttons simultaneously.
The following message, asking you to confirm your choice, will be
displayed.
fig.08-10
To cancel the procedure, press the [Reset] button.
2.
If you are sure that you wish to erase the song, press the
[Rec] button.
AT-15_e.book 69 ページ ２００５年１月２１日 金曜日 午後８時１４分
To Next Page
Loading...
