Roland AT15 Music Atelier - Loading Disk Rhythms into Internal Memory

36
Using the Rhythm Performance
■ Loading Disk Rhythms Into Internal Memory
The [Disk] button already contains 4 Rhythms, but these can be rewritten by
Rhythms from a Music Style disk. Rhythms loaded from the disk into
internal memory will not be lost even if the power is turned off. It is
convenient to load frequently-used disk Rhythms into internal memory.
fig.03-14
1.
Press the Rhythm [Disk] button (indicator lights).
2. Insert the Music Style disk into the disk drive.
3.
Use the Select [-] and [+] buttons to select a disk Rhythm
(indicator begins to blink).
fig.03-15
4. After selecting a disk Rhythm, press the Rhythm [Disk]
button once more.
The following screen appears.
fig.03-16
Numbers to which no rhythm is saved are indicated in the screen by “- - -”
following the number.
5
3
1, 4,
6, 7
Press the [Start/Stop]
b
utton, you can hear the
Rhythm.
AT-15_e.book 36 ページ ２００５年１月２１日 金曜日 午後８時１４分