Roland AT15 Music Atelier - Playing Rhythms (Starting and Stopping the Rhythm); Starting the Rhythm Automatically When You Play the Lower Keyboard or Pedalboard (Sync Start); Starting at the Press of a Button

31
Using the Rhythm Performance
Playing Rhythms
(Starting and Stopping the Rhythm)
To start the rhythm, press the [Intro/Ending] button or the [Start/Stop]
button. You can also make the Rhythm start after playing an Intro, or make
the Rhythm stop after playing an Ending.
fig.03-03
■
Starting the Rhythm Automatically When You Play
the Lower Keyboard or Pedalboard (Sync Start)
1. Hold down the [Trad/Acoustic] rhythm button and press the
[Disk] button to turn Sync Start on.
The [Start/Stop] button begins flashing.
2.
Play either the Lower keyboard or the Pedalboard.
The rhythm simultaneously starts when you play the lower manual or
pedalboard.
■ Starting at the Press of a Button
❍ Starting with an Intro
1.
Press the [Intro/Ending] button.
The Intro is played and the Rhythm starts.
While the Intro is playing, the [Intro/Ending] button indicator will light,
until the Intro ends then the button indicator will go dark.
❍ Making the Intro Short and Simple
1.
Press the [Fill In] button for a few seconds.
[Start/Stop] and [Fill In] button’s indicators will blink.
2. Press the [Start/Stop] button.
A short Intro is played and the Rhythm starts.
When the Arranger
function is switched off,
you can start Rhythms with
the pedalboard.
This setting is saved to the
registration.
AT-15_e.book 31 ページ ２００５年１月２１日 金曜日 午後８時１４分