Roland BK-3 - Page 18

18 QUICK GUIDE
Her er et eksempel:
1. Tryk på [MENU] knappen
Displayet viser nu:
2. Brug [UP] eller [DOWN] knapperne til at vælge menupunkt som skal ændres.
3. Tryk på [ENTER] for at vælge i dette eksempel: ”Global”
Display viser nu:
I dette billede kan du vælge Display Contrast, Tuning osv.
4. Brug [UP] eller [DOWN] knapperne til at flytte curserlinien op under
”Display Contrast”
5. Tryk på [ENTER] for at vælge (tekstlinie vises nu med negativ skrift).
Tips: Du kan også ændre værdi, uden at trykke på [ENTER], hvis du i stedet trykker på
[INC] eller [DEC] knapperne direkte, når du står på ønskede parameter
6. Brug [INC] eller [DEC] knapperne for at ændre værdi.
7. Tryk på [ENTER] knappen igen for at forlade parameterfeltet.
18
About the Display and Cursor
Operation
This section introduces the information that appear on the main page in
BK-3’s display and how to navigate the menu.
Main page
Current measure
or remaining time
Selected or linked
le type: stl, SMF,
WAV, mp3
Time signature Tempo setting or time
stretching
Current “Key”
setting
Octave settings
of the Upper and
Lower parts.
Name of the selected
rhythm (or loaded
le)
One Touch memory
indication
Lock status eld
Real-time part
eld: UPP, LWR.
Selected sounds Name of the last
chord you played
Wireless icon
Moving Between Windows and Setting
Parameter Values
Using the following buttons you can navigate the menu, select the setting
you want to change and change it:
Here is an example of how to do it.
1. Press [MENU] button.
The display changes to:
7. Basic Operation of the BK-3
This page allows you to select the function group that contains the
setting you want to change.
NOTE
In some cases, the [MENU] button may recall a special edit menu
window instead of a main menu page.
2. Press the [UP] or [DOWN] button to select the entry of the
desired function group.
For this example, we will select “Global”.
3. Press the [ENTER] button to go to the “Global” function
group.
The display changes to:
On this display page, “Display Contrast”, “Tuning” and other entries
can be changed directly. Other entries provide access to additional
display pages.
4. Press the [UP] or [DOWN] button to move the cursor to the
parameter whose value you want to change. For example
“Display Contrast”.
5. Press the [ENTER] button to select the parameter.
The setting eld of the selected parameter is displayed in reverse.
TIPS
You can change value without selecting or deselecting the
parameter ([ENTER] button) but using the [INC] or [DEC] buttons
directly.
6. Use the [INC] or [DEC] button to change the value.
7. Press the [ENTER] button again to deselect the eld.
18
About the Display and Cursor
Operation
This section introduces the information that appear on the main page in
BK-3’s display and how to navigate the menu.
Main page
Current measure
or remaining time
Selected or linked
le type: stl, SMF,
WAV, mp3
Time signature Tempo setting or time
stretching
Current “Key”
setting
Octave settings
of the Upper and
Lower parts.
Name of the selected
rhythm (or loaded
le)
One Touch memory
indication
Lock status eld
Real-time part
eld: UPP, LWR.
Selected sounds Name of the last
chord you played
Wireless icon
Moving Between Windows and Setting
Parameter Values
Using the following buttons you can navigate the menu, select the setting
you want to change and change it:
Here is an example of how to do it.
1. Press [MENU] button.
The display changes to:
7. Basic Operation of the BK-3
This page allows you to select the function group that contains the
setting you want to change.
NOTE
In some cases, the [MENU] button may recall a special edit menu
window instead of a main menu page.
2. Press the [UP] or [DOWN] button to select the entry of the
desired function group.
For this example, we will select “Global”.
3. Press the [ENTER] button to go to the “Global” function
group.
The display changes to:
On this display page, “Display Contrast”, “Tuning” and other entries
can be changed directly. Other entries provide access to additional
display pages.
4. Press the [UP] or [DOWN] button to move the cursor to the
parameter whose value you want to change. For example
“Display Contrast”.
5. Press the [ENTER] button to select the parameter.
The setting eld of the selected parameter is displayed in reverse.
TIPS
You can change value without selecting or deselecting the
parameter ([ENTER] button) but using the [INC] or [DEC] buttons
directly.
6. Use the [INC] or [DEC] button to change the value.
7. Press the [ENTER] button again to deselect the eld.