QUICK GUIDE 19
SPIL PÅ BK-3 MED LIVEPARTERNE
BK-3 indeholder 2 parter der kan spilles live vha. keyboardet eller MIDI. De kaldes UPP
og LWR. Du kan vælge din ønskede lyd for hver part.
Vælg lyd og spil på keyboardet (Upper Part)
På BK-3 kan du vælge din personlige lyd ”Tones” i din højre hånd. Du kan frit vælge
mellem de mange lyde til de 2 Liveparter. Lydvalget er altid gældende for den part
(UPP eller LWR) hvis felt det står med negativ skrift. BK-3 har 10 toneknapper.
1. Tryk på en af [TONE] knapperne [1]~[9] for at vælge den ønskede instrumentlyd.
Følgende skærmbillede vises:
2. Spil på keyboardet og du hører valgte instrumentlyd
3. Tryk [INC] eller [DEC] for at vælge en anden lyd på listen
4. Du kan også vælge at bruge [UP] eller [DOWN] knapperne for at ”bladre” i listen og
efterfølgende trykke [ENTER] når den ønskede lyd er fundet.
5. Hvis du ønsker en lyd fra lydgruppe, tryk på en anden [TONE] knap og gentag punkt 3.
6. Tryk [EXIT] for at forlade lydvalgsindstillingen.
19
5. If you need select a Tone of another family, press another
Tone button and repeat the step 3.
6. Press [EXIT] to leave the Tone selection page.
Selecting Tones and Play Two Voices
Simultaneously (Dual)
1. Press and hold the [DUAL] button.
The following screen appears.
The sound selected for the Lower part is displayed in reverse.
2. Press the [INC] or [DEC] button to select the desired Tone
in the list.
MEMO
Tones can also be selected by simply pressing the [NUMERIC]
key and entering their number (p. 20).
3. You can also use the [UP] or [DOWN] button to move the
cursor in the list and then press [ENTER] to select the Tone
4. If you need select a Tone of another family, press another
Tone button and repeat the step 2.
5. Press the [DUAL] button to activate the Lower part.
The [DUAL] button lights and Lower part plays full keyboard.
6. Play the keyboard.
You’ll hear the sound of Lower and Upper part simultaneously.
7. Press [EXIT] to leave the Tone selection page.
MEMO
If the Split function is active ([SPLIT] button lights) the notes to
the left of split point are played back by Lower part (p.19).
Play Dierent Voices with the Left
and Right Hands (Split)
1. Press the [SPLIT] button
The [SPLIT] button lights.
Your BK-3 contains two real-time parts: Upper (UPP) and Lower (LWR). You
can assign the desired sounds (or “Tones”) to each part.
Selecting Tones and Playing the
Keyboard (Upper Part)
In BK-3 the sounds you can assign to the parts are called “Tones”. The BK-3
allows you to assign any of the available Tones to any of the two real-time
parts. Tone selection always applies to the part (UPP or LWR) whose eld is
currently displayed in reverse. The BK-3 has ten tone buttons.
1. Press a TONE buttons [0]~[9] to select the instrumental
sound that you want to play.
The following screen appears.
The sound selected is displayed in reverse.
MEMO
You can also select one of the favorite sounds. See “9. Favorite
Tones” p. 21.
2. Play the keyboard.
You’ll hear the sound of the selected instrument.
3. Press the [INC] or [DEC] button to select another desired
Tone in the list.
MEMO
Tones can also be selected by simply pressing the [NUMERIC]
key and entering their number (p. 20).
4. You can also use the [UP] or [DOWN] button to move the
cursor in the list and then press [ENTER] to select the Tone.
In this case the Tone is recalled when you press the [ENTER] button.
8. Playing the BK-3’s Real-Time Parts
19
5. If you need select a Tone of another family, press another
Tone button and repeat the step 3.
6. Press [EXIT] to leave the Tone selection page.
Selecting Tones and Play Two Voices
Simultaneously (Dual)
1. Press and hold the [DUAL] button.
The following screen appears.
The sound selected for the Lower part is displayed in reverse.
2. Press the [INC] or [DEC] button to select the desired Tone
in the list.
MEMO
Tones can also be selected by simply pressing the [NUMERIC]
key and entering their number (p. 20).
3. You can also use the [UP] or [DOWN] button to move the
cursor in the list and then press [ENTER] to select the Tone
4. If you need select a Tone of another family, press another
Tone button and repeat the step 2.
5. Press the [DUAL] button to activate the Lower part.
The [DUAL] button lights and Lower part plays full keyboard.
6. Play the keyboard.
You’ll hear the sound of Lower and Upper part simultaneously.
7. Press [EXIT] to leave the Tone selection page.
MEMO
If the Split function is active ([SPLIT] button lights) the notes to
the left of split point are played back by Lower part (p.19).
Play Dierent Voices with the Left
and Right Hands (Split)
1. Press the [SPLIT] button
The [SPLIT] button lights.
Your BK-3 contains two real-time parts: Upper (UPP) and Lower (LWR). You
can assign the desired sounds (or “Tones”) to each part.
Selecting Tones and Playing the
Keyboard (Upper Part)
In BK-3 the sounds you can assign to the parts are called “Tones”. The BK-3
allows you to assign any of the available Tones to any of the two real-time
parts. Tone selection always applies to the part (UPP or LWR) whose eld is
currently displayed in reverse. The BK-3 has ten tone buttons.
1. Press a TONE buttons [0]~[9] to select the instrumental
sound that you want to play.
The following screen appears.
The sound selected is displayed in reverse.
MEMO
You can also select one of the favorite sounds. See “9. Favorite
Tones” p. 21.
2. Play the keyboard.
You’ll hear the sound of the selected instrument.
3. Press the [INC] or [DEC] button to select another desired
Tone in the list.
MEMO
Tones can also be selected by simply pressing the [NUMERIC]
key and entering their number (p. 20).
4. You can also use the [UP] or [DOWN] button to move the
cursor in the list and then press [ENTER] to select the Tone.
In this case the Tone is recalled when you press the [ENTER] button.
8. Playing the BK-3’s Real-Time Parts
To Next Page
Loading...
