38 QUICK GUIDE
ANDRE VIGTIGE FUNKTIONER
Transponer på BK-3
Denne funktion giver dig mulighed for at transponere BK-3, således at der kan spilles
i andre tonearter end der f.eks. læses på noden. Dette er særligt anvendeligt, hvis den
toneart en sang er skrevet i, skal flyttes til et andet toneleje for at den kan synges, eller
hvis man skal spille sammen med andre musikere.
1. Tryk på [KEY] knappen.
Displayet skifter til:
Den valgte transponering vises på linien i displayet.
2. Brug [DEC] eller [INC] for at vælge den ønskede transponering
(vises i halvtonetrin: -6~0~+5).
Hvis transponering har anden værdi end ”0” vil [KEY] lyse og indikere at instrumentet
transponeret.
3. Tryk på [KEY] knappen for af slå transponering fra (lys i [KEY] knap slukker).
34
14. Other important functions
This section presents other important functions you may need regularly.
Transposing to a Dierent Key
This function allows you to transpose the BK-3’s pitch in semi-tone steps.
Depending on the mode setting, this transposition applies to all sections
or just a specic setting. See p. 48.
1. Press [KEY] button.
The display changes to:
The current “KEY” setting (transposition interval) is displayed and
already selected.
MEMO
Pressing and holding the [KEY] button locks the “Key” setting.
2. Use the [INC] or [DEC] button to select the desired “Key”
setting.
“Key” setting
-6 ~ 0 ~ +5 (semitone units)
If the “Key” setting diers from “0”, the [KEY] indicator lights.
After a few seconds, the “KEY” pop-up window disappears. Press the
[EXIT] button to close it immediately.
NOTE
If you choose to transpose the real-time parts, rhythm playback
is also transposed. MEMO
You can also change the key setting using [MENU] button
“Performance Edit” “Key” (p. 48).
Changing the Octave
This function allows you to transpose the real-time parts (Upper and
Lower)1 up or down in octave steps.
1. Press OCTAVE [-]/[+] button
The display changes to:
2. Use the [UP] or [DOWN] button to select the desired real-
time part Upper (UPP) or Lower (LWR).
3. Use the OCTAVE[-] or [+] button to select the desired
“Octave” setting.
“Octave” setting
-4 ~ 0 ~ +4 (semitone units)
MEMO
You can also change the octave setting using [MENU] button
“Performance Edit” “Tone Part View” “Octave Shift” (p. 45).
Using the ‘Melody Intell(igent)’
Function
The automatic accompaniment can add a counter-melody to the notes
you play with the Upper part (UPP). Those automatic harmonies are based
on the chords you play in the chord recognition area.
The counter-melody is played by the Melody Intelligent part. There are 18
harmony types to choose from. See “Melody Intelligent” settings” p. 50
1. Press the [MELODY INTELL] button (so that it lights).
This adds a harmony to the notes you play.
If you want you can change the Melody Intelligent Parameters:
2. Press [MENU] button “Performance Edit” “Melody
Intelligent”
For more information about Melody Intelligent Parameters see p.
50
34
14. Other important functions
This section presents other important functions you may need regularly.
Transposing to a Dierent Key
This function allows you to transpose the BK-3’s pitch in semi-tone steps.
Depending on the mode setting, this transposition applies to all sections
or just a specic setting. See p. 48.
1. Press [KEY] button.
The display changes to:
The current “KEY” setting (transposition interval) is displayed and
already selected.
MEMO
Pressing and holding the [KEY] button locks the “Key” setting.
2. Use the [INC] or [DEC] button to select the desired “Key”
setting.
“Key” setting
-6 ~ 0 ~ +5 (semitone units)
If the “Key” setting diers from “0”, the [KEY] indicator lights.
After a few seconds, the “KEY” pop-up window disappears. Press the
[EXIT] button to close it immediately.
NOTE
If you choose to transpose the real-time parts, rhythm playback
is also transposed. MEMO
You can also change the key setting using [MENU] button
“Performance Edit” “Key” (p. 48).
Changing the Octave
This function allows you to transpose the real-time parts (Upper and
Lower)1 up or down in octave steps.
1. Press OCTAVE [-]/[+] button
The display changes to:
2. Use the [UP] or [DOWN] button to select the desired real-
time part Upper (UPP) or Lower (LWR).
3. Use the OCTAVE[-] or [+] button to select the desired
“Octave” setting.
“Octave” setting
-4 ~ 0 ~ +4 (semitone units)
MEMO
You can also change the octave setting using [MENU] button
“Performance Edit” “Tone Part View” “Octave Shift” (p. 45).
Using the ‘Melody Intell(igent)’
Function
The automatic accompaniment can add a counter-melody to the notes
you play with the Upper part (UPP). Those automatic harmonies are based
on the chords you play in the chord recognition area.
The counter-melody is played by the Melody Intelligent part. There are 18
harmony types to choose from. See “Melody Intelligent” settings” p. 50
1. Press the [MELODY INTELL] button (so that it lights).
This adds a harmony to the notes you play.
If you want you can change the Melody Intelligent Parameters:
2. Press [MENU] button “Performance Edit” “Melody
Intelligent”
For more information about Melody Intelligent Parameters see p.
50
To Next Page
Loading...
