Roland BK-3 - Page 33

QUICK GUIDE 33
Nedenstående illustrerer om ONE TOUCH funktionen er aktiveret eller ej:
One Touch funktion (OT 1) aktiveret.
One Touch funktion deaktiveret (slået fra).
26
The ONE TOUCH memories help you to select Tones for the real-time parts
that match the atmosphere of the current rhythm. There are four such ONE
TOUCH memories per rhythm.
Select a ‘One Touch’
1. Select the desired rhythm.
See page “Selecting Rhythms” p. 24.
2. Switch on the [ONE TOUCH] button (its indicator lights).
If you haven’t selected any ONE TOUCH memory since switching
on the BK-3, the indicators of TONE buttons [1], [2], [3] and [4] ash.
Otherwise, the BK-3 automatically recalls the last ONE TOUCH
memory you selected.
The main page displays “OT --” (or the number of the last ONE
TOUCH memory).
The indicators of TONE buttons [1]~[4] ash.
3. Press the ashing TONE button assigned to the desired
ONE TOUCH memory ([1]~[4]).
The indicator of the button you press lights, while the indicators of
the remaining three buttons still ash.
4. Start playback of the rhythm.
See page “Playing Back Rhythms” p. 24.
5. Play a melody on the keyboard.
6. Now press another TONE ([1]~[4]) button than the one
that is currently active.
7. Again play a melody on the keyboard.
The newly selected ONE TOUCH memory has recalled a dierent
sound for the melody part. Note that the ONE TOUCH function also
recalls other settings, like the tempo, INTRO/ENDING, etc.
MEMO
The BK-3 has a function that allows you to exclude certain
settings when a new ONE TOUCH memory is selected. See
“One Touch Hold” p. 51.
8. Press a dierent TONE [1]~[4] button to recall the
associated ONE TOUCH memory.
Tone selection for the real-time part as well as other settings
change in accordance with the newly selected ONE TOUCH
memory.
Deselect ‘One Touch’
1. To switch o the ONE TOUCH function and return to the
Tones that were selected before you activated the ONE
TOUCH function, press the TONE [1]~[4] button whose
indicator lights steadily.
Its indicator ashes along with the other three TONE buttons.
2. Press the [ONE TOUCH] button to leave ONE TOUCH
memory selection mode.
The TONE buttons stop ashing. (Only the indicator corresponding
to the last Tone family you selected lights steadily.) You can now
select dierent Tones for real-time part without actually leaving the
ONE TOUCH function (if it is still on).
How Can You Tell Whether the ONE
TOUCH Function is On or O?
If the “ONE TOUCH” eld on the main page is followed by a number (1~4),
the ONE TOUCH function is currently on. If the “ONE TOUCH” eld is
followed by a dash (“–”), the ONE TOUCH function is o.
One Touch (1) ON
One Touch OFF
11. One Touch Memories: Why using them?
26
The ONE TOUCH memories help you to select Tones for the real-time parts
that match the atmosphere of the current rhythm. There are four such ONE
TOUCH memories per rhythm.
Select a ‘One Touch’
1. Select the desired rhythm.
See page “Selecting Rhythms” p. 24.
2. Switch on the [ONE TOUCH] button (its indicator lights).
If you haven’t selected any ONE TOUCH memory since switching
on the BK-3, the indicators of TONE buttons [1], [2], [3] and [4] ash.
Otherwise, the BK-3 automatically recalls the last ONE TOUCH
memory you selected.
The main page displays “OT --” (or the number of the last ONE
TOUCH memory).
The indicators of TONE buttons [1]~[4] ash.
3. Press the ashing TONE button assigned to the desired
ONE TOUCH memory ([1]~[4]).
The indicator of the button you press lights, while the indicators of
the remaining three buttons still ash.
4. Start playback of the rhythm.
See page “Playing Back Rhythms” p. 24.
5. Play a melody on the keyboard.
6. Now press another TONE ([1]~[4]) button than the one
that is currently active.
7. Again play a melody on the keyboard.
The newly selected ONE TOUCH memory has recalled a dierent
sound for the melody part. Note that the ONE TOUCH function also
recalls other settings, like the tempo, INTRO/ENDING, etc.
MEMO
The BK-3 has a function that allows you to exclude certain
settings when a new ONE TOUCH memory is selected. See
“One Touch Hold” p. 51.
8. Press a dierent TONE [1]~[4] button to recall the
associated ONE TOUCH memory.
Tone selection for the real-time part as well as other settings
change in accordance with the newly selected ONE TOUCH
memory.
Deselect ‘One Touch’
1. To switch o the ONE TOUCH function and return to the
Tones that were selected before you activated the ONE
TOUCH function, press the TONE [1]~[4] button whose
indicator lights steadily.
Its indicator ashes along with the other three TONE buttons.
2. Press the [ONE TOUCH] button to leave ONE TOUCH
memory selection mode.
The TONE buttons stop ashing. (Only the indicator corresponding
to the last Tone family you selected lights steadily.) You can now
select dierent Tones for real-time part without actually leaving the
ONE TOUCH function (if it is still on).
How Can You Tell Whether the ONE
TOUCH Function is On or O?
If the “ONE TOUCH” eld on the main page is followed by a number (1~4),
the ONE TOUCH function is currently on. If the “ONE TOUCH” eld is
followed by a dash (“–”), the ONE TOUCH function is o.
One Touch (1) ON
One Touch OFF
11. One Touch Memories: Why using them?