Owner’s Manual

Thank you, and congratulations on your choice of the Roland CUBE-100 BASS Amplifier.

These sections provide important information concerning the proper operation of the unit.

Additionally, in order to feel assured that you have gained a good grasp of every feature provided

by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and

kept on hand as a convenient reference.

This unit is equipped with a protection circuit.

The protection circuit helps ensure safety by operating when excessive input continues for a long

time while the device is at a location with a high ambient temperature. Sound drop-out may occur

when the protection circuit is actuated during use.

Please read through the documentation carefully to ensure correct use.

Main Features

●

Adopting Roland’s original FFP technology, this highly functional DSP bass amp features 100-watt

sound output through the newly developed 30 cm (12-inch) coaxial 2-way wide-range speaker.

●

The amp is equipped with a total of eight COSM amp model types, including seven of the most

popular bass amps along with a newly developed SUPER FLAT.

SUPER FLAT

is an original amp type that features a wide-range frequency and faithful response

suitable for use with upright basses.

●

In addition to an easy-to-use 4-band equalizer, this amp features a SHAPE function for even

greater flexibility in creating sounds and rich sound variation.

●

The amp is equipped with a total of three bass effect systems, including COMPRESSION, an EFX

system with CHORUS, FLANGER, and T-WAH, and basic DELAY/REVERB.

●

In addition to RECORDING OUT/PHONES jack with high-quality sound modeling, the CUBE-

100 BASS is also equipped with professional quality BALANCED OUT, LINE OUT, and TUNER

OUT, and EXTERNAL SPEAKER jacks. With such expandability, this amp can be used for a wide

variety of applications, from home recording to live performances.

FFP (Feed Forward Processing)

is system control technology that optimizes the performance of

the amp, speakers, and cabinet characteristics according to the signals being input, based on the

results of analyses of the operation and behavior of each section of existing amp systems.

COSM (Composite Object Sound Modeling)

is Roland’s innovative and powerful sound

modeling technology. COSM analyzes the many factors that make up the original sound, such as

the electrical and physical characteristics of the original, and then produces a digital model that

can reproduce the same sound.

* All product names mentioned in this document are trademarks or registered trademarks of their

respective owners.

written permission of ROLAND CORPORATION.

Before using this unit, carefully read the sections entitled

• IMPORTANT SAFETY INSTRUCTIONS (p. 2)

• USING THE UNIT SAFELY (p. 3–p. 4)

• IMPORTANT NOTES (p. 4).

CB-100_e.book 1 ページ２００４年８月２７日　金曜日　午後２時１３分

Roland CUBE-100 BASS - Circuit Board (Main Board 1)

Table of Contents

Other manuals for Roland CUBE-100 BASS

Related product manuals