13
Muting (silencing) a specific audio track
During playback, you can switch audio tracks between muted (silent) and playing
statuses.
1. During playback, press [STATUS] for the audio track that you want to mute
(silence).
[STATUS] will change from green to blinking, and the sound of that audio track will
be muted (silenced).
2. Once again, press the [STATUS] key that you caused to blink in step 1.
[STATUS] will change from blinking to lighting solidly in green, and that audio track
will resume playing.
An audio track whose
[STATUS] was dark when
playback began cannot be
switched to Play status by
pressing [STATUS] during
playback. ([STATUS] will not
light in green.)
To Next Page
Loading...
