Roland Edirol R-44 - System Setup: Card Management and Reset; SD Card Operations and Factory Reset

64
System setup
fig.pj-name1.efig.pj-name1.eps
1
Press the R-44 [MENU] button.
The System Menu screen is shown on the Display.
fig.hd-uti1.eps
2
Use the Cursor buttons [ ] [ ] to select 8 SD Card,
and press the [ENTER] button.
The SD Card Utility screen is shown.
* If you decide to cancel, press the [EXIT] button.
formatfig.hd-uti2.eps
3
Use the Cursor buttons [ ] [ ] to select either
“Format” or “Check,” and press the [ENTER] button.
fig.hd-uti3.eps
4
The display displays the “Are you sure?” confirmation
message. Use the Cursor buttons [ ] [ ] to select
“Yes” if you are sure you want to execute or “No” if you
decide to cancel without executing.
Then press the [ENTER] button.
fig.hd-uti4.eps
The message shown at right is shown during processing.
Do not turn off the power during processing.
When processing has completed, you are automatically returned to the System Menu screen.
5
Press the [EXIT] button again to return to the Main screen.
If you want to make other system related settings, use the Cursor buttons [] [] to select the desired menu
item.
* When first using a SD card with the R-44, be sure to format it with the R-44.
Formatting and Checking the SD memory card
R-44_e_new.book 64 ページ ２００８年１月７日 月曜日 午後５時８分