Roland Edirol R-44 - Page 65

65
System setup
fig.pj-name1.efig.pj-name1.eps
fig.F
1
Press the R-44 [MENU] button.
The System Menu screen is shown on the Display.
act-uti1.eps
2
Use the Cursor buttons [ ] [ ] to select 9 Factory
Reset
, and press the [ENTER] button.
The Factory Reset screen is shown.
fig.fact-reset.eps
3
Press the [ENTER] button to perform Factory Reset.
* If you decide to cancel, press the [EXIT] button.
fig.fact-reset.eps
4
The display displays the “Are you sure?” confirmation
message. Use the Cursor buttons [ ] [ ] to select
“Yes” if you are sure you want to execute or “No” if you
decide to cancel without executing.
Then press the [ENTER] button.
When processing has completed, you are automatically returned to the System Menu screen.
fig.hd-uti4.eps
The message shown at right is shown during processing.
Do not turn off the power during processing.
5
Press the [EXIT] button again to return to the main screen.
If you want to make other system related settings, use the Cursor buttons [] [] to select the desired
menu item.
Executing Factory Reset (Restoring factory default settings)
R-44_e_new.book 65 ページ ２００８年１月７日 月曜日 午後５時８分