To Next PageTo Next Page
Need help?Do you have a question about the Roland EGX-20 and is the answer not in the manual?
General| Resolution | 0.01 mm |
|---|---|
| Drive System | Stepper motor |
| Interface | USB |
| Type | Engraver |
| Spindle Speed | 30, 000 rpm |
| Spindle Motor | DC motor |
| Operating Systems | Windows |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Software | Roland Engraving Software |
Federal Communications Commission statement regarding radio frequency interference.
Notice regarding Canadian interference-causing equipment regulations.
Warning about chemicals in the product related to California law.
Manufacturer and representative details for European Union countries.
Guide to viewing PDF manuals included on the Roland Software Package CD-ROM.
Instructions on how to access the program help files from the Windows Start menu.
Explains the meaning and importance of WARNING and CAUTION labels.
Describes the meaning of various safety symbols used in the manual.
Identifies and explains labels found on the EGX-20 and its AC adapter.
Overview of what the EGX-20 can achieve, such as nameplates and reliefs.
Lists all accessories and components provided with the EGX-20.
Identifies key components and controls of the EGX-20 machine.
Guidelines for optimal placement and secure connection of the EGX-20.
Step-by-step instructions for connecting the AC adapter, power cord, and computer.
Procedure for securing the adhesive sheet to the EGX-20's table for material holding.
Detailed steps for mounting the cutter holder into the spindle unit.
Introduces the Roland Software Package and the installation process.
Lists the necessary computer specifications for running the EGX-20 software.
A comprehensive guide to installing the EGX-20 drivers and included software.
How to place and secure material on the EGX-20's table for nameplate engraving.
Steps to insert and secure the correct cutting tool for nameplate engraving.
Procedure to define the starting position for the engraving process.
Introduction to using Dr. Engrave software for designing nameplates.
How to input text and apply font styles within Dr. Engrave.
Techniques for resizing, moving, and rotating text elements in Dr. Engrave.
Adjusting character appearance and enabling fill engraving options.
Applying stroke fonts and converting text to editable vector shapes.
How to save design files and configure cutting parameters.
Fine-tuning driver settings for optimal engraving quality and performance.
The process of executing an engraving job and how to halt it if necessary.
Steps to remove the cutter and prepare for 3D cutting operations.
Procedure for removing the depth regulator, essential for 3D mode.
How to install the appropriate cutter for creating reliefs.
Placing and securing material on the table for 3D relief projects.
Defining height and positional origins for precise 3D machining.
Using 3D Engrave software to design and prepare 3D relief projects.
Creating 2D shapes and text that will be converted into 3D reliefs.
Creating the machine's cutting path based on design and material parameters.
Reviewing results, saving data, and fine-tuning cutting parameters for reliefs.
Executing the 3D cutting process and how to stop it.
Explains the different nose cones and how to change them for various tasks.
Covers specialized 3D operations like fill engraving and surfacing.
Lists available replacement parts like cutters and adhesive sheets.
Details optional parts for scribing and the procedure for performing this engraving technique.
Instructions for routine cleaning and upkeep of the EGX-20.
Explains control panel features and origin point reset procedures.
Lists common problems and provides solutions for the EGX-20.
Detailed technical data, dimensions, and performance metrics of the EGX-20.
Product disposal guidelines and compliance details for different regions.
