Roland EGX-30A - User Manual

USER'S MANUAL

To ensure safe usage and full performance of this product, please be sure to read through this manual
completely.

To ensure immediate access whenever needed, store this manual in a safe location.

Unauthorized copying, quotation, or translation of this manual, in whole or in part, without the written
approval of Roland DG Corp., is prohibited.

The contents of this document and the specications of this product are subject to change without
notice.

Roland DG Corp. assumes no responsibility for any loss or damage relating to this product, regardless of
any defect in this product or this manual. Such loss or damage, whether direct or indirect, includes, but
is not limited to, that arising from the specications or performance of this product, that due to failure
of the product to perform, and that arising from any article made using this product.

Roland EGX-30A Specifications

General

Interface	USB
Software	Dr. Engrave
Spindle Motor	DC motor
Power Supply	AC 100-240V, 50/60Hz
Resolution	0.01 mm/step

Summary

To Ensure Safe Use

Operational Safety Precautions

Details hazards from improper machine operation and safe usage practices.

Electrical and Fire Hazards

Highlights risks associated with electrical connections, power, and potential fire.

Power Cord and Outlet Safety

Provides essential guidance on safe handling and use of power cords and outlets.

Chapter 1 Getting Started

Machine Component Identification

Diagrams and descriptions of the machine's front and rear components.

Control Panel Layout and Functions

Details the function of each button, knob, and indicator on the control panel.

Chapter 2 Installation and Setup

Installation Environment Guidelines

Specifies conditions to avoid for safe and reliable machine installation, such as flame or humidity.

Connecting the Power Cord

Guidance on correctly connecting the power cord to the machine and power outlet.

Connecting to the Computer

Instructions for establishing USB or serial connections between the machine and a computer.

Installing the Windows Driver

Step-by-step guide for installing the necessary driver for computer communication.

Chapter 3 Getting Ready for and Performing Cutting

Material Loading

Methods for securely attaching materials to the machine table for cutting.

Installing Engraving Tools

Step-by-step instructions for installing and setting the depth of an engraving cutter.

Setting the Origin Point

Explains how to define the starting point for cutting operations on the material.

Adjusting Cutting Parameters

Instructions for setting spindle speed and cutting speed for optimal results.

Chapter 4 Appendix

Troubleshooting Common Issues

Provides solutions for common problems like initialization failures or incorrect cutting.

Technical Specifications

Lists key technical data, dimensions, power, and operating conditions of the machine.