Roland EGX-30A - Installing the Software ( Dr. Engrave )

Installing the Software ( Dr. Engrave )
Procedure

Display the setup menu of the Roland Software Package.

Click [Install] of "Dr. Engrave".

Windows 2000/XP
The setup program starts. Follow the mes-
sages to carry out setup and nish setting
up the program.
Windows Vista
The [User Account Control] appears, click
[Allow].
The setup program starts. Follow the mes-
sages to carry out setup and nish setting
up the program.

When installation nishes, the screen
shown at left appears. Click [Close]
or [OK].

When all installation nishes, click
.

Remove the CD-ROM from the CD-ROM drive.
Install Menu
2-4 Installing and Setting Up the Software
24 Chapter 2 Installation and Setup