Roland EGX-30A User Manual

Chapter 2 Installation and Setup
2-1 Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Character cutter
(φ 3.175 mm)
Depth regulator nose Diamond scraper adapter Hexagonal screwdriver
Spanner Adhesive sheet Test material Vacuum-adapter
Hexagonal wrench AC adapter Power cord
Roland Software Pakcage
CD-ROM
User's manual USB cable
Plate
16

Roland EGX-30A Specifications

General

Interface	USB
Software	Dr. Engrave
Spindle Motor	DC motor
Power Supply	AC 100-240V, 50/60Hz
Resolution	0.01 mm/step