Roland EGX-30A - Cable Connections; Connecting the Power Cord

Chapter 2 Installation and Setup
2-3 Cable Connections
Connecting the Power Cord
WARNING
Do not use with any electrical power supply that does not meet the ratings dis-
played on the AC adapter.
Use with any other power supply may lead to re or electrocution.
WARNING
Never use any AC adapter and power cord other than the AC adapter and power
cord included with the machine.
Doing so may lead to re, electrical shock, or electrocution.
WARNING
Handle the power cord, plug, and electrical outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in re or electrical shock.
WARNING
When using an extension cord or power strip, use one that adequately satises
the machine's ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy extension
cord may cause re.
AC adapter
Power code
Electrical outlet
20