Roland EGX-20 - To Ensure Safe Use; WARNING and CAUTION Notices; Understanding Safety Symbols

To Ensure Safe Use
Improper handling or operation of this machine may result in injury or damage to property. Points which
must be observed to prevent such injury or damage are described as follows.
About WARNING and CAUTION Notices
WARNING
Used for instructions intended to alert the user to the risk of death or severe injury
should the unit be used improperly.
CAUTION
Used for instructions intended to alert the user to the risk of injury or material damage
should the unit be used improperly.
Note: Material damage refers to damage or other adverse eects caused with respect
to the home and all its furnishings, as well to domestic animals or pets.
About the Symbols
The symbol alerts the user to important instructions or warnings. The specific meaning of the
symbol is determined by the design contained within the triangle. The symbol at left means "danger of
electrocution."
The symbol alerts the user to items that must never be carried out (are forbidden). The specic thing
that must not be done is indicated by the design contained within the circle. The symbol at left means
the unit must never be disassembled.
The symbol alerts the user to things that must be carried out. The specic thing that must be done is
indicated by the design contained within the circle. The symbol at left means the power-cord plug must
be unplugged from the outlet.
WARNING
Never attempt to disassemble, repair, or
modify the machine.
Doing so may result in re, electrical shock,
or injury. Entrust repairs to a trained service
technician.
Do not use with any electrical power supply
that does not meet the ratings displayed on
the AC adapter.
Use with any other power supply may lead to re
or electrocution.
Do not use while in an abnormal state (i.e.,
emitting smoke, burning odor, unusual
noise, or the like).
Doing so may result in re or electrical shock.
Immediately unplug the power-cord plug from
the electrical outlet, and contact your authorized
Roland DG Corp. dealer or service center.
WARNING
Ground the unit with the ground wire.
Failure to do so may result in risk of electrical
shock in the even of a mechanical problem.
Do not use with any power supply other
than the dedicated AC adapter.
Use with any other power supply may lead to re
or electrocution.
Use only with the power cord included with
this product.
Use with other than the included power cord may
lead to re or electrocution.
3