6 Optional Parts
Replacement Cutters and Consumable Parts
The following replacement blades and consumable parts are available.
Replacement Cutters
General-purpose (general-purpose cutters suitable for engraving acrylic and plastic plates)
(Blade width)
• ZEC-A2013 0.127 mm
• ZEC-A2025 0.254 mm (* This is the originally included blade.)
• ZEC-A2051 0.508 mm
• ZEC-A2076 0.762 mm
Flat cutter (blades having a wider tip than general-purpose cutters)
(Blade width)
• ZEC-A2105 1.52 mm
• ZEC-A2190 1.91 mm
• ZEC-A2230 2.29 mm
• ZEC-A2320 3.175 mm
Quarter-round types (having a larger tip pocket than general-purpose cutters, and suited to engraving
soft material at high speed)
(Blade width)
• ZEC-A2013-QR 0.13 mm
• ZEC-A2025-QR 0.25 mm
Adhesive Sheet
• AS-10 10 sheets
Replacement Parts
• ZM-12 Spindle-motor unit (with a belt and a pulley)
* As a general guide, we recommend replacing this after
every 1,000 hours.
• ZS-20 Spindle unit
42
To Next Page
Loading...
