EasyManuals Logo

Roland FA-06 User Manual

Roland FA-06
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Getting Ready
FOOT PEDAL jacks
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the AUDIO INPUT jacks may be low. If this happens, use connection cables that do
not contain resistors.
* Acoustic feedback could be produced depending on the location of microphones relative to speakers. This can be remedied by:
Changing the orientation of the microphone(s).
Relocating microphone(s) at a greater distance from speakers.
Lowering volume levels.
MIDI connectors
Connect an external MIDI device here.
SD card slot
This unit is shipped from the factory with the
included SD card inserted and the SD card
protector secured with screws. To remove the SD
card, remove the screws.
The SD card stores various data of this unit (e.g.,
settings, sounds, samples).
USB COMPUTER port
Use a commercially available USB
2.0 cable to connect this unit to
your computer.
USB FOR UPDATE port
You can update the system program by connecting a USB ash
drive here.
You can also connect a wireless USB adapter (WNA1100-RL;
sold separately) here, and use wireless-enabled applications
(such as the iPhone app Air Recorder).
* Use USB Flash Memory (supports USB 2.0 Hi-Speed Flash
Memory) sold by Roland. We cannot guarantee operation if
other products are used.
* Carefully insert the USB ash drives all the way in—until it is
rmly in place.
CTRL 1, CTRL 2 jacks
You can connect an expression pedal (EV-5; sold
separately) or pedal switch (DP series; sold separately)
here and use them to control various parameters or
functions.
* Use only the specied expression pedal (EV-5; sold
separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage
to the unit.
HOLD jack
You can connect a pedal switch
(DP series; sold separately) and
use it as a hold pedal.
Rear Panel (Connecting Your Equipment)
6

Other manuals for Roland FA-06

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland FA-06 and is the answer not in the manual?

Roland FA-06 Specifications

General IconGeneral
Control typeButtons
Backlight colorRed
Backlight buttonsYes
MIDI-keyboard number of keys61 keys
Display typeLCD
Display diagonal5 \
Product colorBlack
Sound effectsAcoustic resonance, Synthesizer
InterfaceUSB
Headphone outputs1
USB ports quantity2
Compatible memory cardsSDHC
6.35 mm (1⁄4-inch) output3
Power source typeAC
Bit rate16 bit
Product typeDigital synthesizer
Keyboard number of keys61
Maximum polyphony (notes)128
Reverberation effects quantity6
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width1008 mm
Height101 mm
Weight5700 g

Related product manuals