Roland Fantom G8

206
Playing Back a Song
In the Song Play/Song Edit screen, you can select a part or
patch by pressing [PATCH].
1. In the Song Play/Song Edit screen, press [PATCH].
The Part Select window will appear.
Use / to move the cursor, and use the VALUE dial or
[INC] [DEC] to change the value.
If you change the part during recording, the recording track will
not change even if the Auto Track function (p. 222) is on.
You can fast-forward, rewind, or jump within a song not only while
the song is stopped, but also during playback. Perform the following
actions.
Fast-forward: Press [
]
Continue fast-forwarding: Hold down [
]
Fast-forward rapidly: Press [
] and then press [ ]
Rewind: Press [
]
Continue rewinding: Hold down [
]
Rewind rapidly: Press [ ] and then press [ ]
Jump to the preceding marker:
Hold down [SHIFT] and press [
]
Jump to the next marker: Hold down [SHIFT] and press [
]
Jump to the beginning of the song:
Press [
]
Jump to the JUMP marker: Press [JUMP]
Song playback will pause if you jump to the beginning or end of
the song while playing-back.
You can mute a track so that it will not produce sound during
playback.
1. Press [SONG].
The Song Play screen will appear.
2. Turn the VALUE dial or use
/ to select the track that
you want to mute.
3. Use
/ to move the cursor to “PLAY.”
fig.17-001
4. Press [DEC] to select the “MUTE” setting.
You can also use the pads to switch the track muting.
→ “8 TRACK MUTE (Using the Pads to Mute Tracks)” (p.
197)
Selecting a Sound (Part or Patch) in
the Song Screen
Value
Explanation
Group
Part Group
Part Part
Type Patch Type
Bank Patch Bank
Patch Number/Name Patch Number/Name
F-Key
Explanation
F5
Patch Edit
Edit a patch.
F6
Patch List
Open the Patch List screen.
F7
Rehearsal
(displayed only during
recording)
Audition Sounds
(Rehearsal Function)
F8
Close
Close the Part Select window.
Fast-forwarding or Rewinding
during Playback
Muting the Playback of a Track
(MUTE)
Fantom-G_r_e.book 206 ページ ２００９年７月２日 木曜日 午後２時５５分