Roland G-70 - Page 30

G-70
35
Press the USER PROGRAM 1 the display shows:
Insert a formatted diskette 2DD into the driver to carry out the test.
A
fter a while, the display shows:
A
fterwards, the display shows:
A
t the end, if the result is OK the display shows:
If a protected disk is inserted, the display shows:
**WRITE PROTECTED MEDIA ERROR** EJECT DISK AND PRESS EXIT.
If you do not insert any diskette 2DD, the display shows:
** Insert a 2DD Disk , Please…**
If the result of the test is negative, the display mentions one of the following errors:
READ ERROR, WRITE ERROR, DISK TEST ERROR,
** NO SUCH FILES / DIRECTORY **
If the result is ok, the display mentions
* DISK TEST OK . **
Extract the FDD.
**** FLOPPY CONTROLLER 2DD ****
Insert a 2DD DISK, please…..
Press EXIT to Skip.
**** FLOPPY CONTROLLER 2DD ****
** DISK TEST OK . **
Eject disk and press EXIT
**** FLOPPY CONTROLLER 2DD ****
Checking disk type, Wait Please….
Press EXIT to Skip.
**** FLOPPY CONTROLLER 2DD ****
Testing , Wait Please….
Press EXIT to Skip.
5.1- 2DD FLOPPY DISK CONTROLLER