Roland G-70 - Page 31

Feb.2005
36
5.2 2HD FLOPPY DISK CONTROLLER
Press the USER PROGRAM 2 button to carry out the 2HD test.
Use the same procedure stated in § 5.1 – FLOPPY DISK CONTROLLER 2DD
To revert to the MASS STORAGE, press EXIT.
Attention: Use only a formatted diskette 2DD and 2HD type.
To revert to the Main Menu, press EXIT.
5.3 - PCMCIA COMPACT FLASH TEST
Press the USER PROGRAM 3, the display shows:
When you insert your card into the slot, the test will be carried out, the display shows:
If the test is OK the display shows:
If the test fails, the writing CARD TEST ERROR should appear.
To revert, press EXIT.
5.4 - NAND FLASH TEST
x Press the USER PROGRAM 4 button, the display shows:
If the Test fails, you should carry out the ”§ 5.5 NAND FLASH FORMAT “
To revert, press EXIT.
* PCMCIA COMPACT FLASH *
Insert Card, please…..
Press EXIT to Skip.
**** NAND FLASH ****
** TEST OK **
Press EXIT to Skip.
* PCMCIA COMPACT FLASH *
**CARD TEST OK **
Eject Card and press Exit
* PCMCIA COMPACT FLASH *
wait please checking …..
Press EXIT to Skip.