Roland G-70 - Page 32

G-70
37
5.5 - FORMAT NAND FLASH
x Press the USER PROGRAM 5 button, the display shows:
To revert, press EXIT.
5.6 - USB
x Press the USER PROGRAM 6 button, the display shows:
Once the USB cable is connected to the PC, the display shows:
To revert, press EXIT.
Press the EXIT button again to revert to the Main Menu video.
6 - HARMONIZER
x Press the USER PROGRAM 6 button, the display shows:
Make sure that the display shows the version 1.0.
Pressing EXIT the display will revert to the Main Menu.
**** NAND FORMAT ****
** FORMAT OK **
Press EXIT to Skip
**** HARMONIZER ****
*** Harmony Board Ver. 1.0 ***
Press EXIT to Skip.
**** USB MASS STORAGE ****
Connect USB cable to PC please…….
Press EXIT to Skip.
**** USB MASS STORAGE ****
Connection USB OK
Press EXIT to Skip.