17
Getting Familiar
Here you will find 6 different functions, all designed to challenge and
help you improve your timing, rhythmical sense, stamina and make
you more comfortable with the pad positions. When entering this
mode, you will also see which function you are using appear in the
left side of the display. We advise to check each function as
explained here first, before make any adjustments to the factory
settings. This way you will have a good grasp of the possibilities.
1.
Press the [COACH] button and you see <QUIET COUNT> in the
display.
2.
Press the [ ] button now to see what it does.
3.
Press it again to stop.
4.
Press the [ ] cursor and you see:
5.
Press the [ ], and here you will see:
This means that in a four measure pattern, there will be a one measure
break on the 4th measure.
If you set “QUIET” to “2” then it means the last two measures are the break.
Depending on your metronome setting for TYPE, you can use this function with the NORMAL metronome
function or with the STYLE GUIDE.
Setting Possibilities:
Depending on the amount of MEASURES chosen, the QUIET possibilities will differ. RANDOM means the
COACH will change the break lengths in a random way.
6.
If you push the [ ] one more time, you can set the tempo.
COACH MODE
Quiet Count
Measures
From 2 to 16 measures.
Quiet
From RANDOM and 0.5 to 4 measures.
CURSOR
COACH Button
METRONOME
Button
HPD-10_e1.book 17 ページ ２００６年４月７日 金曜日 午後２時１４分
To Next Page
Loading...
Need help?
General
