Roland JV-1000 - Select a Performance

3.
How
to record
a
song
5. If you are
sure
you
wish to initialize
the
floppy
disk, press
ENTER.
While
the
disk
is being
initialized, the DISK
indicator beside
the LCD
display will
light.
The TRACK
SELECT
button
indicators
will flash in the
following
sequence:
8
-+TEMPO
-
4
->
RHYTHM.
When initialization
is complete,
the DISK
indicator and
TRACK SELECT
indicators will
go
out, and the
following
display
will appear.
If
you
wish
to
initialize
another
floppy disk, press
ENTER and
follow
the
instructions
in the
display.
6.
After
you
have
initialized
enough floppy
disks, press
STOP.
Then press
SHIFT+MODE
->
ENTER to return to
standby
mode.
II
" 0HS
!1=
J=128R REAL
|
|
Select a
performance
In order to play a
song containing
two or more
parts, you must set the
synthesizer
section to
performance play mode so
that it will be
able to
produce two or more
parts
at
once. Then either select a
Performance
which contains
the sounds and
rhythm set
that
you suit
your
song, or modify
the Performance
settings to select the
sounds you
want.
In
this example we
will create
our song using the
performance in preset
memory A1 6.
Press
PERFORMANCE to
enter
performance play
mode, and use the
patch group
buttons
to
select
preset
memory performance group 'A.'
Then use BANK
and NUMBER
to
select
'16.'
The performance we
have selected
is
a single
mode performance (see
SYNTHESIZER
MANUAL/p.72).
21