Roland JV-1000 - Overdubbing; Select the Part You Wish to Play; Overdub the Backing Part

3. How
to record
a song
4.
Overdubbing
Overdubbing
refers
to the
process
of recording new
parts
on
a
different
track while
listening
to the previously recorded
track(s). When you finish
recording
the melody
part, let's
use
realtime recording
to record the backing part on track 3.
Select the
part
you wish to
play
For
the
backing
part we will
use Part 3 of the synthesizer
section. Use^/^.
to
move
the
cursor
to part
3. If PART SWITCH
3
is dark, press the switch
(so
the
indicator lights).
Play
the
keyboard
to check the sound
of part
3.
Overdub the
backing
part
1
.
Press
RESET
to return
to the beginning
of the song.
2. Press
REC/LOAD
to select the recording standby
display,
and press
track
key
3 (so the indicator
flashes).
3. Record the
backing
part on
track 3 in
the same way as
you
did for
the
melody
part.
*
If
you
wish
to record
track
3
without
playing
back track
I, press track 7
to
turn off the
indicator before
you press REC/LOAD.
The
track I indicator
will
remain
dark, and the
indicator for
track 3 will
flash.