Roland JV-1000 - Step Recording; Select the Part You Wish to Record

3.
How
to record
a
song
5. Step
recording
Step
recording refers to the
process by
which notes and
rests
can entered
into a
track
(using the
numeric keypad
or the
keyboard)
one at a
time.
This method
of recording
is suitable
for musical
parts
which must be
played
back with
precise
timing.
Step
recording also
makes it
possible to
record
very intricate
or
difficult
passages
that would be
impossible
to
play
in realtime.
We
will
use step
recording to
record
the bass
part in
track 2.
Select
the
part you
wish to
record
We
will use part 2 for the bass
part. Use
-^/^-
to
move
the cursor
part
2.
Play the
keyboard to
check the
sound.
1
.
Press
RESET
to
return
to
the
beginning
of the song.
2.
Use
^/V
to
get the
recording mode
to flash,
and use the
alpha-diai
to
select
"STEP."
^m
SONG 1
J=120R
STEP
|
Recording mode
3. Press
REC/LOAD to
select
the
recording
standby
display.
Then
press
track button
2
to
get the
indicator to
flash.
The
track to be
recorded
27