Roland JV-1000 - Save the Performance

3. How to
record
a song
Modify the
volume
balance
and pan
Press
the
LEVEL
(or PAN)
the
settings
of
each
part.
of
the
synthesizer section.
The
display will
indicate
ncrease
the
part level
Decrease
the part level
Either play
the keyboard,
or press SH I FT+
PLAY/SAVE
to playback
the
sample
song
you
just recorded.
Move
the slider for
each part
to set an
appropriate
volume
balance (or
pan
balance).
Save
the
performance
The
changes
you just
made to the performance
will
be lost
if
you turn
the
JV-1
000 off
or
select
another
performance. If you
wish
to save the
modified
data,
you must save
it
into the
synthesizer
user memory (internal
memory
or
a
DATA
card).
1. Set
the
performance
name.
Press
EDIT
-+
COMMON
to select the
"PERFORM
NAME"
page.
Use
<4/^
to
move
the
cursor, and
use
parameter
slider
1 or INC/DEC
to select
characters
to enter the
name "My Perform."
You
can also use
the BANK/NUMBER
buttons
to input
characters.
To switch
between
uppercase/lower
characters, press CAPS
to turn the
indicator
on/off.
When
the
indicator
is lit,
uppercase
characters will
be
entered.