Roland JV-1000 - Page 59

4. Sequencer
editing function
*
You can also
specify
the tracks using the track
keys or numeric keys.
However, the
track
keys cannot be
used to
specify
"TRK
ALL"
(all
tracks).
If you
use the
numeric keys to
specify
the track,
be
sure
to
press ENTER
to
finalize the
value.
4. If
you
wish to
copy
one of the phrase tracks,
specify the copy
method
and the
MIDI
channel.
(Aipha-dial
->
ENTER
->
Alpha-dial
-*
ENTER)
Copy
method
MIDI channe
5. Specify the
measure at which to begin
copying and the
number
of
measures to be
copied.
(Alpha-dial
->
ENTER
-*•
Alpha-dial
->
ENTER)
Starting
measure Number of measures
from starting measure
*
''FOR" indicates
the numberofmeasures
to be
copied. For example,
if you wish to copy
measures 2
through 5 (that is,
2, 3, 4,
and
5),
make this setting:
"FROM M=2
FOR
4.
"
6.
Specify the
measure
number
of the copy destination.
(Alpha-dial
->
ENTER)
Copy
destination measure
*
If
you
select
"M-END,
"
the data will
be
copied onto
the
end
of the song.
7. Specify the
number of times the data is to be copied.
(Alpha-dial
ENTER)
Number
of copies
8. Press REC/LOAD to
execute
the copy operation.
9. Press
stop
to end
the
procedure.
For details,
refer
to
SEQUENCER MANUAL/p.96.