Roland JV-30 - Key Modes and Tone Editing

Selecting
the
Key
Mode
The JV-30
provides the
following 4 Key
Modes,
allowing
you to alter
the type
of
expression
applied to a Tone,
or to play
two Tones
layered
together.
e
n
e o
b
OFAT
Adds
sound portions
which have been
minutely shiffted in pitch to the
currently selected Tone.
This mal<:es
the Tone fatter or
fuller. When output in stereo,
the sound will be
broader, span-
ning
the stereo spectrum from
left to right.
O
OCTAVE
Adds sound portions
which are one octave lower in
pitch
to
the currently
selected Tone, mak-
ing
it fatter.
ODUAL
Layers
another Tone
with the currently selected Tone.
A great range of
sound creations are pos-
sible, depending on the
choices made
for this combination of
sounds.
[Changing Tones]
::
Piano i
>bt.rings
Current
Selected Part
(T) Move the
cursor
(^)
using PARAMETER
[A]
[T], and select the Part for which you
wish to change the Tone.
The Tone
can
be
changed for the Part where the cursor appears.
(D
Use the Tone
Selection button to change the Tone.
*
Using PART
[-^J
[],
the Part
where the cursor appears can be changed.
16