Roland MC-808 - 2. Creating an Original Pattern; Selecting a Sound (Patch)

29
Effects editing parameters
There are 47 types of multi-effect.
Parameters with the designators “#1” and “#2” can be
controlled using the [MFX 1/2 C1] [MFX 1/2 C2] faders.
01: STEREO EQ (Stereo Equalizer)
This is a four-band stereo equalizer (low, mid x 2, high).
fig.MFX01
02: SPECTRUM
This is a type of filter that modifies the timbre by boosting or cutting
the level of specific frequencies. It is similar to an equalizer, but has
eight frequency points fixed at locations most useful for adding
character to the sound.
fig.MFX02
Multi-Effects Types
FILTER (9 types)
01
STEREO EQ p. 29
02 SPECTRUM p. 29
03 ENHANCER p. 30
04 ISOLATOR p. 30
05 LOW BOOST p. 30
06 SUPER FILTER p. 30
07 STEP FILTER p. 31
08 AUTO WAH p. 31
09 HUMANIZER p. 31
MODULATION (7 types)
10
PHASER p. 31
11 STEREO PHASER p. 32
12 STEP PHASER p. 32
13 RING MODULATOR p. 32
14 TREMOLO p. 32
15 AUTO PAN p. 33
16 ROTARY p. 33
CHORUS (6 types)
17
HEXA-CHORUS p. 33
18 TREMOLO CHORUS p. 33
19 SPACE-D p. 34
20 STEREO CHORUS p. 34
21 STEREO FLANGER p. 34
22 STEP FLANGER p. 34
DYNAMICS (7 types)
23
OVERDRIVE p. 35
24 DISTORTION p. 35
25 GUITAR AMP SIMULATOR p. 35
26 STEREO COMPRESSOR p. 36
27 STEREO LIMITER p. 36
28 SLICER p. 36
29 GATE p. 37
LOFI (6 types)
30
LOFI NOISE p. 37
31 LOFI COMPRESS p. 37
32 LOFI RADIO p. 38
33 TELEPHONE p. 38
34 PHONOGRAPH p. 38
35 TAPE ECHO p. 38
PITCH (2 types)
36 FBK PITCH SHIFTER p. 39
37 2Vo PITCH SHIFTER p. 39
REVERB (1 type)
38 GATED REVERB p. 39
DELAY (9 types)
39 STEREO DELAY p. 40
40 MODULATION DELAY p. 40
41 TRIPLE TAP DELAY p. 41
42 QUADRUPLE TAP DELAY p. 41
43 MULTI TAP DELAY p. 41
44 REVERSE DELAY p. 41
45 SHUFFLE DELAY p. 42
46 TIME CONTROL DELAY p. 42
47 TIME SKIP DELAY p. 43
Multi-Effects Parameters
Parameter
Value Description
Low Freq
200, 400 Hz Frequency of the low range
Low Gain
#1
-15– +15 dB Gain of the low frequency
range
High Freq 2000, 4000,
8000 Hz
Frequency of the high range
High Gain
#2
-15– +15 dB Gain of the high frequency
range
Mid1 Freq 200–8000 Hz Frequency of Middle Range 1
Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0 Width of Middle Range 1
Select a higher Q value to
narrow Middle Range 1.
Mid1 Gain -15– +15 dB Gain of Middle Range 1
Mid2 Freq 200–8000 Hz Frequency of Middle Range 2
Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0 Width of Middle Range 2
Select a higher Q value to
narrow Middle Range 2.
Mid2 Gain -15– +15 dB Gain of Middle Range 2
Level 0–127 Output level
Parameter
Value Description
Q
0.5, 1.0, 2.0,
4.0, 8.0
Simultaneously adjusts the
width of the adjusted ranges
for all of the frequency bands.
Pan #1 L64–63R Stereo location of the SPEC-
TRUM output
Level #2 0–127 Output level
Band 1 (250Hz) -15– +15 dB Gain of each frequency band
Band 2 (500Hz)
Band 3 (1kHz)
Band 4 (1.25Hz)
Band 5 (2kHz)
Band 6 (3.15Hz)
Band 7 (4kHz)
Band 8 (8kHz)
L in
R in
L out
R out
4-Band EQ
4-Band EQ
Spectrum
L out
R out
Pan R
Pan L
L in
R in
MC-808_Slist_e.book 29 ページ ２００７年９月７日 金曜日 午前１１時１１分