Roland monoFab SRM-20 User Manual

79
Preparing the Machine
Flow Diagram
※
※
※不要な場合があります。詳しくは手順内容をご確認ください。
“STEP 1 : Turning the Power On” (p. 80)
“STEP 2 : The Machine Run-in” (p. 81)
“STEP 3 : Conrm the Command Set” (p. 83)
“STEP 4 : Attach the Cutting Tool” (p. 84)
*Work is unnecessary in some cases. For detail, please conrm procedure contents.

Roland monoFab SRM-20 Specifications

General

Brand	Roland
Model	monoFab SRM-20
Category	Power Tool
Language	English