Roland MP200 User Manual

11
Performing
Saving Your Performance Settings
(Registration)
Lets you register your favorite performance settings so that you can
easily recall those settings while you perform.
Such settings are called a “Registration.” You can save a total of 36
registrations, 9 each in buttons [1]–[4]. These 36 registrations are
collectively called a “Registration set.”
=
Registration set
36 registration
1-1 2-1 3-1 4-1
1-9 2-9 3-9 4-9
Settings That Are Saved in a Registration
Setting Page
The selected tone (including Split or Dual tones) p. 8, p. 8
Ambience p. 17
Rotary Speed p. 8
Key Touch p. 17
Transpose p. 10
Split on/o p. 8
Split point p. 8
Left Shift p. 8
Right Shift p. 8
Dual on/o p. 9
Tone 1 Shift p. 9
Tone 2 Shift p. 9
Balance (Split, Dual) p. 8
Twin Piano on/o p. 9, p. 25
Twin Piano Mode p. 9, p. 25
Damper Pedal Part p. 26
Center Pedal p. 26
Left Pedal p. 26
MIDI Transmit Ch. p. 27
Recalling and Editing a Registration
1. Press the [Registration] button.
2. Press a number button ([1] to [4]) to choose the
location where the desired registration is saved.
3. Turn the [ ] knob to select the registration
variation.
The selected registration is recalled.
MEMO
You can also use a pedal to recall registrations (p. 27).
4. To edit the selected registration, press the [ ] knob
and then turn the [ ] knob toward the right.
MEMO
If you press the [Registration] button to exit the Registration
screen, you will return to the state prior to recalling the
registration.
Saving Current Settings into a Registration
NOTE
When you save a registration into a location, it will overwrite any
registration already stored at that location.
1. While holding down the [Registration] button,
press a button from [1] to [4] to select a registration
and then turn the [ ] knob to select a registration
variation.
2. Rename the registration.
Select the character
which you want to
change
Turn the [ ] knob
Change the character
Press the [
] knob (conrm)
/
Turn the [ ] knob (change the character)
/
Press the [ ] knob (back)
Insert one character
Press the [
s
] button
Delete one character
Press the [
7
] button
If you decide to cancel, press the [
] button.
3. Turn the [ ] knob to select the
(
at the right
edge of the screen, and then press the [ ] knob to
conrm.
The registration is saved.
NOTE
Never turn o the power while the screen indicates “Executing...”

Roland MP200 Specifications

General

Brand	Roland
Model	MP200
Category	Musical Instrument
Language	English