Roland MP200 User Manual

7
Before You Play
Using the Headphones
Use headphones if you want to perform without the sound being
heard nearby. This piano has two headphone jacks, two people can
also use headphones simultaneously.
1. Connect your headphones to the headphone jack.
When you connect headphones, sound is no longer heard from
the piano’s speakers.
2. Use the [ ] knob to adjust the volume of the
headphones.
MEMO
Whenever you are not using the headphones, you can hang them
on the headphone hook.
Headphone hook
Using the Pedals
By pressing the pedals, you can apply eects to the sound of the
piano.
Soft pedal
Sostenuto pedal
Damper pedal
Damper pedal
(right)
Use this pedal to sustain the sound. While this
pedal is held down, notes will be sustained
for an extended time even if you release your
ngers from the keyboard.
The resonance of the sound is aected by how
deeply you press the pedal.
Sostenuto pedal
(center)
The notes you are pressing when this pedal is
depressed will be sustained.
Soft pedal
(left)
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces
a sound that is not as strong as when otherwise
played with the equivalent strength. The
softness of the tone can be varied subtly by the
depth to which you press the pedal.
* When operating the pedal, take care not to pinch your ngers
between the moving part and the body of the unit. Pay special
attention to this when using the unit where children are present.
NOTE
Under the pedals there is an adjuster for securing the pedals. As
you use the piano, the adjuster might creep upward, allowing the
pedals to wobble when you step on them. If this occurs, turn the
adjuster to lower it into rm contact with the oor. In particular
if the piano is placed on carpet, you should lower the adjuster so
that it rmly presses down on the oor.
Adjuster
Basic Operations of Functions
To operate the functions of this piano, you use the [ ] (select/
conrm) knob and the [ ] (back) button.
Change an on-screen item or value Turn the [ ] knob
Conrm Press the [
] knob
Return to the previous screen / Exit
the current screen
Press the [
] button
Return to the default value Long-press the [
] knob

Roland MP200 Specifications

General

Brand	Roland
Model	MP200
Category	Musical Instrument
Language	English