Roland R-8M - Page 133

INDEX
[Index (by
function)]
Instrument settings
Change the instrument assigned to a note number
26
P!ay
two
instruments from one note number (Layer function)
25
Change the sound of an instrument 26,
38
Output the sound from the MULTI OUT jacks (output assign)
28, 38
Change
the
panning
(output
assign) 28, 38
Adjust the volume (level)
28
Allow successive
notes of an
instrument
to
overlap
(assign type) 28, 38
Keep successive notes of an instrument from overiapping (assign
type)
28, 38
Keep specified instruments from overlapping
(assign
type)
28, 38
Modify the volume in response to
velocity
(velocity curve)
29, 38
Mute the decay in response to noteoff (note off switch/velocity switch)
30, 38, 56
Let
different
note
numbers modify
the
sound (Performance Section)
35
Performance Controls
Select Patches/Fee! Patches
10,
14
Use pitch bend 25,35,55
Use the hold
pedal
55
Modify the volume of an entire section
25, 35, 55
Modify the panning of an entire section
55
Use control change messages to modify the sound
of an
instrument
33, 35
Periodically modify the sound in synchronization with MIDI
clock (Regular Feel) 48
Use velocity to modify the
sound (Regular Feel) 49
Randomly modify the sound (Random
Feel) 50
Patch/Feel Patch
setting functions
Copy sound parameters (Instrument Section)
31
Exchange
sound parameters (Instrument Section)
32
Copy a Performance Section
39
Copy other Patch settings
41
Exchange Patch settings 42
Copy the factoty Patch settings
43
Initialize
Patch settings (clear)
44
Name
a
Patch
40
Store
Patch settings
41
Exchange Feel Patch settings
52
Copy
the factory
Feel Patch settings
53
Initialize Feel Patch settings (clear)
54
Store Feel Patch settings
51
Storing
data Copy internal
data into a ram card
(save)
61
Copy RAM
card data into R-8M internal memory (load)
62
Transmit data as an exclusive message
63
Other
Use two
or more R
-
8M's to increase the number of maximum simultaneous notes 58
Hear the
ROM play demonstration
9
Adjust the display contrast
65
131