(DHOW
TO PLAY
THE SOUNDS
[Selecting
the Feel Patches
The Feel function changes the tone of
the
specified
instruments to simulate the timbral changes that
would naturally occur if a drummer
were
actually playing.
* For the
factory Feel Patch settings, refer to "Feel
Patch List" on page 115.
*The way
in which the Feel Function works and the
setting procedure Is explained in detail
in "Feel Function"
(cr
see
page 45).
•
Selecting a Feel Patch
(j)
Use the
CURSOR
[^E
to move to the Feel Patch
number.
F'LflV <PfiTCH-01>
P:
1-01
F: I-J^^
rr
Feel Patch number
(1-16)
I
:
Internal Feel
Patches
C
: RAM card Feel Patches
OFF: Feel Patch is not used
'
Use
VALUE
[a][V]to select an
internal Feel Patch number (1-01—
i-1
6).
To use a RAM card Feel Patch, insert the RAM card
firmly into the RAM card slot. Use the
CURSOR
|-^||^
[to move to "I", and use VALUE[A][v]to change
it to
"C".
If you don't
want
to use a Feel
Patch, set "I" to "OFF".
* Newly purchased RAM
cards cannot
be
used as they are. If you are using a RAM card for
the first time, refer to
"Using a RAM Card"
(
cr
see page
60).
* Program change messages
can
be
used
to
select Feel Patches from an external device.
Program numbers are user assignable
(c3-see
page 57).
14
To Next Page
Loading...
