IDHOW
TO
PLAY THE SOUNDS
Checking a sound ROM card
If instruments from a sound
ROM card are assigned to any of the sections, you can
check
whether
the
necessary card is inserted by using the
CURS0R
f*<1|>-
1
in
the
Play mode to select the following
display.
The display
will show
up
to
3 card numbers of the ROM cards used by the Patch. If
a sound ROM
card used by the Patch is not inserted, that card number will blink.
<
Example
> When
the
card
number 2 is not inserted
PLflV <PflTCH-01>
CORD 01
BM
03
Card
number
If
fewer
than 3 sound ROM cards are specified by the Patch,
"
—
"
will
be displayed.
< Example > When only card
number 1 is used
PLflV <PflTCH-01>
CARD 01
—
—
If more than 3 sound ROM cards are specified
by
the Patch, this will
be displayed as follows.
PLflV <PflTCH-01>
CflRD 01 02
03i-
ROM
play
ROM PLflV
<StoR>
#4 C0l:CflRNflUflL
I Song name
Card number
Song number
Each sound ROM card contains one ROM play
song
which
uses the instruments of that card.
To hear the ROM play song, insert the sound
ROM card into a PCM CARD slot,
and use
step
d)
of "Listen to the
ROM Play Demonstration"
(
t=r
see page
9)
to
select the song. (The
numbers
will
change in the order of the PCM
CARD slot number.) The rest of the
procedure
is the same.
13
To Next Page
Loading...
