Roland R-8M User Manual

©BASIC OPERATION
Hf a single display contains two or more parameters, use the
CURS0R
M|[»- |
to
move
to the
value
you
wish
to modify.
Use
VALUE
fAll
V
|
to modify the parameter values. When
you press [v] the
value will
decrease,
and when you press
[a]
the value will
increase. If you continue pressing either button, the value
will
change
continuously.
If you press
[A](or [V])
while holding [v](or
[a]),
the value will
change more rapidly.
How
to use
NOTE#
Normally the CURSOR
[^[l
buttons are
used to
select parameters.
When
editing the parameter
groups shown in the
following
table, however,
you must press
|
NOTE
#
j
(the indicator will
light) so
that the buttons function differently.
Press
I
NOTE#
[
once again (the
indicator
will
gooff), and operation
will
return to normal.
Parameter group
Button function
Feel (instrument assign, regular feel, random feel) Select
set
numbers
in the Feel Patch
Patch/Instrument Section (control change) Select control
change types
Patch/Instrument Section
(sound parameters) Select note numbers
Patch/Performance Section (basic parameters, key follov/ parameters,
sound parameters) Select Performance Sections
[The Jump function
-4 CURSOR
^
This function
allows
you to instantly move to
a
display which has previously
been assigned to a
specific button.
V
VALUE
A
A display
can be
assigned to each of the
CURSOR
Rlf^l
and VALUE[a][v]
buttons. You can
jump to the assigned display at any time.
By assigning
these buttons to
jump to the displays
for
frequently-used functions, you can speed
up editing
operations.
ENTER
How to
assign
a
display
to a button
Cl)
Move
to
the display you wish
to assign.
(^ Press and
hold
[JUMP] until the
|
JUMP] indicator
begins blinking.
®
Press
the button
(CURSOR
HE
°^
VALUE
[aW\
)
you wish to assign
this display to.
* To quit without assigning,
press [JUMP
I
once again.
• How to
jump to an assigned
display
While holding
pUMP
\
press the button to which the display
has been assigned, and you will
move to
that
display.
*
Press the assigned button
before
the UyMPj indicator begins blinking.
22

Roland R-8M Specifications

General

Brand	Roland
Model	R-8M
Category	Recording Equipment
Language	English