Roland R-8M - Page 41

SPATCH
I
How
to copy
a Performance Section
Performance Section settings of a Patch
(memoiy area) can be copied to a Performance
Section in the
temporary area. This is convenient when you want
to use the same settings as a previously
stored
Performance
Section.
Temporary area
Performance
Section 1
^~
\ }
A Patch in the memory
area
(i/
Move to the Performance Section copy display.
Press
|EDIT]
(the indicator will light).
Use the
CURSOR
[T][^] to select
"PATCH" and press
]
ENTER
\
.
Use the
CURSOR
HfFjto
select
"PFM" and press
!
ENTERT
Use
the
CURSOR
i3][F]to
select "C»PY" and press
|
ENTERI
-
Performance Section number of the
copy destination
PflTCH^PFMl^COPV
Copy P:
1-01?
Patch number
(2^
Select the
Performance Section of the copy destination.
Press
fNOTEff
K
the indicator will lightV
Use
the
CURSOR
[^[V] to select the Performance Section
(1 —
4).
Press
!
NOTE#
|
(the indicator will
go out).
@)
Use the
CURSOR[^[^]to select the Patch which contains the Performance
Section you
wish to
copy, press
]
ENTER)
.
1-01—1-32
(internal Patches), C-Ol—
C-32
(RAM card Patches)
@
Use the
CURSOR H[V]to
select
the Performance Section (PFMl—
4)
you wish to copy.
PfiTCH^PFMl^COPV
Copy
PFMl?
Press
I
ENTER
!to copy the
data.
To quit without
copying press!
EXIT!.
If you wish to copy settings from another Performance Section, repeat steps©
—
(5).
While pressing
|
JUMP
[,
press!
EXIT
!to return to the Play mode (the indicator will go out).
39