Roland R-8M - Restoring Factory Settings (Initialize)

©OTHER
FUNCTIONS
2, Adjusting
the Display
Contrast
This function adjusts the
contrast of the
R-8M's LCD. When
using the
R-8M indifferent
locations
you can adjust the contrast
for maximum visibility.
CD
Move to the contrast
setting display.
Press
|EDIT]
(the indicator will
lighty
Use the
CURSOR
LUt^J
to select
"UTIL" and press
|
ENTER
Use the
CURSOR
[TJE^o
select "LCD"
and press
|
ENTER],
UTIL.'-LCD
Contrast =15
Use
VALUE [A][v]to adjust
the contrast
(0—15).
\S/
While pressing
[JUMP
I ,
press
[
EXIT
I
to return
to the Play mode
(the indicator
will go out).
*The
contrast setting
will be maintained
even when
the power is
turned off.
3,
Restoring
All
R-8M
Data
to
the
Factory
Settings
(Initialize)
If you wish to
restore all data
of the R
-
8M to the factory
settings, use the
following procedure.
(D
Turn the R-8M
power
off.
(2)
While pressing
the
CURSOR
f»n
and
|
ENTER],
turn
the power
on.
*+
INITIRLIZE
*+
Press
ENTER.
Press
I
ENTER
|
and
you will be asked
"Are you
sure?".
®
Press)
ENTER
I
once
again and the
data will
be initialized.
To quit without
initializing the
data press]
EXIT
|.
65