Roland RD-300GX - Page 52

52
Using the Convenient Functions in Performances
7.
When you have finished determining the save destination and the name for the new
Setup, press the [ENTER] button.
The [ENTER] and [EXIT/SHIFT] buttons’ indicators are flashing, and the confirmation message
appears.
If you do not want to save the Setup, press the [EXIT/SHIFT] button or [WRITE] button.
The operation is cancelled.
8.
When the [ENTER] button is pressed, saving of the Setup begins.
When you have finished saving the Setup, the [WRITE] button’s indicator goes out and
you are returned to the previous screen.
Never switch off the power while “Executing...” appears in the display.
NOTE
Settings Not Saved in a Setup
The following settings cannot be saved to a Setup.
• TRANSPOSE Settings (p. 32)
• SOUND CONTROL Settings (p. 35)
• EQUALIZER knob Settings (p. 36)
• System Settings (p. 64)
• V-LINK Settings (p. 82)
RD-300GX_e.book 52 ページ ２００８年２月１４日 木曜日 午後１時２６分