Roland RD-300GX - Deleting a Song (Delete SONG)

75
Detailed Settings for Each Function ([EDIT] Button)
7.
Press the [ENTER] button.
The confirmation message appears.
fig.disp
If you do not want to copy the file, press the [EXIT/
SHIFT] button.
8.
Press the [ENTER] button once again to copy
the file.
9.
Press the [EDIT] button, extinguishing its
indicator.
“Executing...” appears in the display while the
copy is in progress. Be sure never to turn off the
power.
This operation deletes a saved song.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Use the [DEC] [INC] buttons to select “File,”
then press the [ENTER] button.
3.
Use the [DEC] [INC] to select “Delete SONG,”
then press the [ENTER] button.
4.
Use the [DEC] [INC] buttons to select the
memory containing the file you want to delete.
5.
Press the [ENTER] button.
The following screen appears.
fig.disp
6.
Use the [DEC] [INC] buttons to select the file
that you want to delete, and press the [ENTER]
button.
If you choose “ALL,” all song files will be deleted.
The confirmation message appears.
fig.disp
If you do not want to delete the file, press the [EXIT/
SHIFT] button.
7.
Press the [ENTER] button to delete the song.
8.
Press the [EDIT] button, extinguishing its
indicator.
“Executing...” appears in the display while the
deletion is in progress. Be sure never to turn off the
power.
Deleting a Song (Delete SONG)
Value
Description
INT
The data in the RD-300GX’s internal memory will be
deleted.
USB
The data on USB memory connected to the USB
MEMORY connector on the rear panel will be
deleted.
NOTE
NOTE
RD-300GX_e.book 75 ページ ２００８年２月１４日 木曜日 午後１時２６分