Roland RD-300GX - Page 89

89
Effect List
47
3TAP PAN
DELAY
Produces three delay sounds; center, left and
right.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
48
4TAP PAN
DELAY
This effect has four delays. Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
49
MULTI TAP
DELAY
This effect provides four delays with feedback. Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
50
REVERSE
DELAY
This is a reverse delay that adds a reversed
and delayed sound to the input sound.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
51
SHUFFLE
DELAY
Adds a shuffle to the delay sound, giving the
sound a bouncy delay effect with a swing feel.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
52 3D DELAY
This applies a 3D effect to the delay sound.
The delay sound will be positioned 90
degrees left and 90 degrees right.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
53
TIME CONTROL
DELAY
A stereo delay in which the delay time can be
varied smoothly.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
54
LONG TIME
CONTROL
DELAY
A delay in which the delay time can be varied
smoothly, and allowing an extended delay to
be produced.
Balance:
Volume balance between the direct sound and the delay sound
(D100:0W–D0:100W)
55 TAPE ECHO
A virtual tape echo that produces a realistic
tape delay sound.
Echo Level:
Volume of the echo sound (0–127)
56 LOFI NOISE
In addition to a Lo-Fi effect, this adds various
types of noise such as white noise and disc
noise.
Balance:
Volume balance between the direct sound and the effect sound
(D100:0W–D0:100W)
57
LOFI
COMPRSSOR
This is an effect that intentionally degrades the
sound quality for creative purposes.
Balance:
Volume balance between the direct sound and the effect sound
(D100:0W–D0:100W)
58 LOFI RADIO
In addition to a Lo-Fi effect, this effect also
generates radio noise.
Balance:
Volume balance between the direct sound and the effect sound
(D100:0W–D0:100W)
59 TELEPHONE
This applies a telephone sound. Balance:
Volume balance between the direct sound and the effect sound
(D100:0W–D0:100W)
60 PHONOGRAPH
Simulates a sound recorded on an analog
record and played back on a record player.
Balance:
Volume balance between the direct sound and the effect sound
(D100:0W–D0:100W)
61 PITCH SHIFTER
A stereo pitch shifter. Fine:
Adjusts the pitch of the pitch shifted sound (-100cent–+100cent)
62
2VOICE PITCH
SHIFTER
Shifts the pitch of the original sound. This 2-
voice pitch shifter has two pitch shifters, and
can add two pitch shifted sounds to the
original sound.
Balance:
Volume balance between the Pitch Shift 1 and Pitch Shift 2
sounds (D100:0W–D0:100W)
63
STEP PITCH
SHIFTER
This pitch shifter changes the shift volume of
the pitch shift sound in a stepped fashion.
Rate:
Rate of modulation (0.05–10.00 Hz)
64 REVERB
Adds reverberation to the sound, simulating
an acoustic space.
Time:
Time length of reverberation (0–127)
65
GATED
REVERB
This is a special type of reverb in which the
reverberant sound is cut off before its natural
length.
Balance:
Volume balance between the direct sound and the reverb sound
(D100:0W–D0:100W)
66
OVERDRIVE
→ CHORUS
This effect connects an overdrive and a chorus
in series.
Chorus Balance:
Adjusts the volume balance between the sound that is sent
through the chorus and the sound that is not sent through the
chorus (D100:0W–D0:100W)
67
OVERDRIVE
→ FLANGER
This effect connects an overdrive and a flanger
in series.
Flanger Balance:
Adjusts the volume balance between the sound that is sent
through the flanger and the sound that is not sent through the
flanger (D100:0W–D0:100W)
Indicated
number
MFX Type Overview
Effect parameter name when changed by holding down
[MULTI EFFECTS] and pressing [INC] or [DEC] (p. 29):
An overview thereof (Value)
RD-300GX_e.book 89 ページ ２００８年２月１４日 木曜日 午後１時２６分