To Next PageTo Next PageWhy is the sound cut off on my Roland Musical Instrument?
The sound may be cut off on your Roland Musical Instrument because when you try playing more than the maximum 128 voices simultaneously, sounds currently being played may be cut out.
Why is there no sound from the left side of my Roland RD-300SX?
If you're not getting any sound from the left side of your Roland Musical Instrument, check if V-LINK is switched on. When V-LINK is switched on, the twelve keys at the left end of the keyboard are used to control images, and no sounds are played with these keys.
Why does sound keep playing when key is pressed on my Roland RD-300SX?
If the sound keeps playing even after you release a key on your Roland Musical Instrument, the hold pedal polarity might be reversed. Check the System Damper Pedal Polarity settings in Edit mode.
Why is high-pitched whine produced by Roland RD-300SX?
When listening through headphones: Certain piano tones that feature vibrant, sparking sounds contain a large high-frequency component, which may make it appear that a metallic reverberation has been applied. This faithfully reproduces the characteristics of acoustic pianos, and does not indicate any malfunction. Since this reverberation becomes particularly audible when supplemented by heavy reverb, you may be able to diminish the problem by reducing the amount of reverb applied to the sound. When listening through speakers: Here, a different cause (such as resonance produced by the RD-300SX) would be suspect.
Why does reverb remain even after reverb is lifted on my Roland Musical Instrument?
General| Keyboard | 88 keys |
|---|---|
| Polyphony | 128 voices |
| Display | LCD |
| Power Consumption | 15 W |
| Sound Engine | SuperNATURAL Piano |
| Effects | Reverb, Chorus |
| Controllers | Pitch Bend, Modulation |
| Connectors | MIDI, USB |
| Included Accessories | Power cord |
| Power Supply | AC adapter |
Explains the meaning of WARNING and CAUTION notices and various symbols used for safety.
Provides essential guidelines for safe operation, including power, environment, and handling.
Details on power connection, placement, and environmental considerations for safe operation.
Detailed explanation of all controls located on the front panel of the RD-300SX.
Description of all input and output connectors found on the rear panel.
Steps for connecting the power cord and AC adaptor, and initial setup.
Instructions for connecting audio devices, headphones, pedals, and MIDI equipment.
Procedure for safely turning the RD-300SX and connected devices on and off.
Using the ONE TOUCH [PIANO] button for optimal piano settings.
How to select different tone categories and individual tones.
Explains how to play single tones, layer tones (Dual), or split the keyboard.
How to select, store, and manage custom performance settings.
Adjusting system-wide parameters like tuning, pedals, and USB driver settings.
Configuring common settings, MFX zones, pedal functions, and zone parameters.
Solutions for no power, no sound, or sound issues with MIDI devices.
Addresses problems like distorted sound, altered tones, and effect malfunctions.
