Roland RD-500 - Page 26

@ Key Touch
Key Touch is a setting which allows you to custom-tailor the response of the keyboard. With this
setting you can set the keyboard to require a light touch to produce loud sounds (for example), or vice
versa.
* The okey Touch Lae set affects MIDI information.
a RAND +: “GRAND 2 E.GRAND MKS-20 |
Abell ReaD} ad
_RBY.TOUCH | INCICATOR . LOCAL BULK
eee °: NARBATION: “pHoes eiano RANG oncan :
eS SesSe.
x © ton * Upper BASS - PERCUSSION
och fat Uae et eel
INTERNAL SOUNDS’
OLOLC
1. Select the Function mode.
2. Press the KEY TOUCH button (the indicator will light).
3. Set the value using the INC/DEC buttons, VALUE slider or the Numerical Keys.
Key Touch Range: 1— 4
Increasing the value will make the key touch ‘heavier.’ That is, a greater playing force will be
required to produce loud sounds.
@ Internal Transpose
26
This parameter allows you to set the pitch of each Part (in semi-tone steps).
GRAND 3 GRAND.2 €.GRANO _MKs:26
CS)
KEY: TOUCH Local BULK
1. Select the Function mode.
2. Press the TRANSPOSE button (the indicator will light).
3. Select the Part for which you wish to set Internal Transpose using the LOWER/UPPER
button.
4. Set the value with the INC/DEC buttons, VALUE slider or Numerical Keys.
Internal Transpose Range: +/-1 octave
The value is shown in semi-tone (~ 12 — 12) steps.
* When the Rhythm Set (Tone Group : PERCUSSION) is assigned to a Part, the pitch of each
Rhythm sound will change if the Internal Transpose is set.