Roland RD-500 - Page 35

, EQUALZER LAYER SPLIT. GRAND 1 GRAND 2 £.GRAND MKS-20
Yelm fal
: OFTUNE PTH, erry ZONE KEY TOUCH. INDICAT
oO : "CHORUS "| LEVEL. VARIATION © AHOOES & ORGAN
3 Derr CONTROL THANEPORE TREMOLO DOWN BEAD UP.
“REVERS = LOWER UPPER SYNTH | STRINGS | “BASS . PERCUSSION -
Hieeidl Ce) Se
ee ATIACK DECAY RELEASE. ONIGHT
INTERNAL SOUNDS ~
1. Select the Function mode.
2. Press the LOCAL button (the indicator will light).
3. Turn the parameter OFF using the INC/DEC buttons, VALUE slider .
* The Local Switch has three settings. For a detailed explanation, see page 39.
* “Local ON 2” is selected whenever the RD-500 is turned on.
@ Setting the MIDI Receive Mode
The MIDI receive mode determines whether the RD-500's internal sound source should receive
Program Change and Control Change messages from the MIDI IN, or not.
LAYER. SPLIT GRANO 1 GRAND 2:/E:GRAND |. MxS-20
| | Jo Coca g
: A = | VAFUMTON.° RHODES “EpiaNO NAMM ‘oncan
“RUNG TRANSPOSE LOWER UPPER SYNTH STRINGS BASS pahcUaaN
=) mm
t INTERNAL SOUNDS ;
® @!'®
1. Select the Function mode.
2. Press the RX CH button as many times as necessary to get the following display:
Mm
rit d
3. Select any of the following three MIDI receive mode using the INC/DEC button or VALUE
slider.
1 In this mode, the RD-500 receives Program Change
fl “Tend and Control Change messages.
In this mode, the RD-500 receive only the
fl ~” rag Control Change messages.
ue
In this mode, the RD-500 does not receive either of the
fl + =| messages.
35